Grandstream P-Codes and Overrides

P-Code Reference

P-Code
P-Code Value
Additional Information
P2 Admin Password  
P3 Display Name  
P8 IP Address Type 0=DHCP,1=Static
P9 Static IP Address Octet 0
P10 Static IP Address Octet 1
P11 Static IP Address Octet 2
P12 Static IP Address Octet 3
P13 Subnet Mask Octet 0
P14 Subnet Mask Octet 1
P15 Subnet Mask Octet 2
P16 Subnet Mask Octet 3
P17 Gateway Octet 0
P18 Gateway Octet 1
P19 Gateway Octet 2
P20 Gateway Octet 3
P21 DNS Server 1 Octet 0
P22 DNS Server 1 Octet 1
P23 DNS Server 1 Octet 2
P24 DNS Server 1

Octet 3
P25 DNS Server 2 Octet 0
P26 DNS Server 2 Octet 1
P27 DNS Server 2 Octet 2
P28 DNS Server 2 Octet 3
P29 Early Dial  
P30 NTP Time Server FQDN or IP Address
P31 SIP Registration 0=Disabled,1=Enabled
P32 Register Expiration in minutes
P33 Voicemail Dial String  
P34 Authentication Password  
P35 SIP User ID  
P36 Authentication ID  
P37 Voice Frames per TX  
P38 Layer 3 QoS  
P39 Local RTP Port  
P40 Local SIP Port  
P47 SIP Server FQDN or IP Address
P49 G723 Frame Rate  
P50 Silence Suppression 0=No,1=Yes
P51 802.1Q/VLAN Tag  
P52 STUN NAT Traversal 0=No,1=Yes
P57 Codec Choice 1 0=g.711u, 8=g.711u, 18=g.729
P58 Codec Choice 2  
P59 Codec Choice 3  
P60 Codec Choice 4  
P71 Offhook Auto Dial 0=No,1=Yes
P72 Use # as Dial Key 0=No,1=Yes
P104 Default Ringtone  
P191 Enable Call Features 0=No,1=Yes
P192 HTTP Firmware Update Server  
P193 Firmware Check Interval In Minutes
P194 Auto Update 0=No,1=Yes
P197 Proxy Require 0=No,1=Yes
P212 Firmware Upgrade 0=TFTP, 1=HTTP
P232 Firmware File Prefix  
P233 Firmware File Suffix  
P234 Config File Prefix  
P238 Check for New Firmware 0=Always, 1=Only when Suffix/Prefix Changes, 2=Never

 

 

 

######################################################################################
## Change Log                                                                       ##
######################################################################################
#-------------------------------------------------------------------------------------
# P value added since GXP2130/2140/2160 1.0.4.10      
#-------------------------------------------------------------------------------------
# Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0.
# P6752, P6753, P6754, P6755, P6756, P6757: Account 1 - Account 6.
 
# Always Authenticate Before Challenge. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
# P20713 = 0
 
# Phonebook Management
# HTTP/HTTPS User Name.
# String
# P6713 =
 
# HTTP/HTTPS Password.
# String
# P6714 =
 
 
 
 
# Bypass Dial Plan Through Call History and Directories. 0 - No, 1 - Yes. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P6758 = 0
 
 
 
 
# Disable Busy Tone on Remote Disconnect. 0 - No, 1 - Yes. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P6762 = 0
 
 
 
 
# XML Applications
 
# Server Path
 
# String
 
# P337 =
 
 
 
 
# Softkey Label
 
# String
 
# P352 = XMLApp
 
 
 
 
#-------------------------------------------------------------------------------------
 
# P value added since GXP2130/2140/2160 1.0.3.9       
 
#-------------------------------------------------------------------------------------
 
# Show Account Name Only. 0 - No, 1 - Yes. Default is 0.
 
# Number: 0, 1
 
# Mandatory
 
# P2380 - P2880: Account 1 - Account 6.
 
 
 
 
# Add Auth Header On Initial REGISTER
 
# 0 - No, 1 - Yes. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P2359 = 0
 
 
 
 
# Language XML URL
 
# String
 
# P2962 =
 
 
 
 
# Auto language download. 0 - Yes, 1 - No. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P2961 =
 
 
 
 
# Validate Certification Chain. 0 - No, 1 - Yes. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P2367 = 0
 
 
 
 
# Capture Location. 0 - Internal Storage, 1 - USB. Default is 0
 
# Number: 0, 1.
 
# Mandatory
 
# P2999 = 0
 
 
 
 
# With RTP Packets. 0 - No, 1 - Yes. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P6007 = 0
 
 
 
 
# USB Filename
 
# String
 
# P6008 =
 
 
 
 
# Sort Phonebook by. 0 - Last Name, 1 - First Name. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P2914 = 0
 
 
 
 
# Public Mode. 0 - No, 1 - Yes. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P1345 = 0
 
 
 
 
# Multicast Paging options
 
# P1566 - P1588
 
 
 
 
# Second Dial Tone
 
# String
 
# Mandatory
 
# P2909 = f1=350,f2=440;
 
 
 
 
# Programmable Keys/Softkeys
 
# P2987 - P2998
 
 
 
 
# Broadsoft IM&P Server.
 
# String
 
# P6006 =
 
 
 
 
# Broadsoft IM&P Port.
 
# String
 
# P6005 =
 
 
 
 
# Broadsoft Network Directories
 
# P2971 - P2986
 
 
 
 
#-------------------------------------------------------------------------------------
 
# The value of P value changed since GXP2130/2140/2160 1.0.2.9     
 
#-------------------------------------------------------------------------------------
 
# Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM,
 
# 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower
 
# Default is 100
 
# Number: 100, 101, 102, 108, 109, 110, 117, 119
 
# Mandatory
 
# P198 = 100
 
 
 
 
#-------------------------------------------------------------------------------------
 
# P value added since GXP2130/2140/2160 1.0.2.9       
 
#-------------------------------------------------------------------------------------
 
# HTTP Proxy
 
# String
 
# P1552 =
 
 
 
 
# HTTPS Proxy
 
# String
 
# P1553 =
 
 
 
 
# BLF Server
 
# String
 
# P2375/P2475/P2575/P2675/P2775/P2875 : Account 1/2/3/4/5/6
 
 
 
 
# Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0
 
# Number: 0, 1
 
# Mandatory
 
# P2364/P2464/P2564/P2664/P2764/P2864 : Account 1/2/3/4/5/6
 
 
 
 
# Default Input Selection. Default is Multi-Tap.
 
# 0 - Multi-Tap, 1 - Shiftable
 
# P2920 = 0
 
 
 
 
# Broadsoft IM&P. Default is 1.
 
# 0 - Disabled, 1 - Enabled
 
# Mandatory
 
# P2964 = 0
 
 
 
 
# Associated Broadsoft Account. Default is 0.
 
# 0 - 5 : Account 1 - Account 6
 
# Mandatory
 
# P2965 = 0
 
 
 
 
# Username.
 
# String
 
# P2966 =
 
 
 
 
# Password.
 
# String
 
# P2967 =
 
 
 
 
# Auto Login. Default is 1.
 
# 0 - Yes, 1 - No
 
# Mandatory
 
# P2968 = 1
 
 
 
 
# Display Non XMPP Contacts. Default is 1.
 
# 0 - Yes, 1 - No
 
# Mandatory
 
# P2969 = 1
 
 
 
 
# Default search mode. 0 - Quick match, 1 - Exact match. Default is 0
 
# Number: 0, 1.
 
# Mandatory
 
# P2970 = 0
 
 
 
 
#-------------------------------------------------------------------------------------
 
# The value of P value changed since GXP2140/2160 1.0.1.14 or GXP2130 1.0.1.19       
 
#-------------------------------------------------------------------------------------
 
# Mute Key Functions While Idle. 0 - DND, 1 - Idle Mute, 2 - Disabled. Default is 0
 
# Number: 0, 1, 2
 
# Mandatory
 
# P1565 = 0
 
 
 
 
#-------------------------------------------------------------------------------------
 
# P values added since GXP2140/2160 1.0.1.14 or GXP2130 1.0.1.19       
 
#-------------------------------------------------------------------------------------
 
# Wallpaper Settings
 
# Wallpaper Source. O - Default, 1 - Download, 2 - USB, 3 - Uploaded
 
# Mandatory
 
# P2916 = 0
 
 
 
 
# Wallpaper Server Path
 
# String
 
# P2917 =
 
 
 
 
# Screensaver Settings
 
# Screensaver. 0 - No, 1 - Yes. Default is 1
 
# Mandatory
 
# P2918 = 1
 
 
 
 
# Screensaver Timeout. Minutes.
 
# Number: 3 - 60
 
# P2919 =
 
 
 
 
#--------------------------------------------------------------
 
# Initial Version Firmware GXP2130 1.0.1.19        
 
#--------------------------------------------------------------
 
 
 
 
#--------------------------------------------------------------
 
# P values added since GXP2140/2160 1.0.0.17        
 
#--------------------------------------------------------------
 
# Broadsoft Phonebook configurations
 
# P1590 - P1649.
 
 
 
 
#--------------------------------------------------------------
 
# Initial Version Firmware GXP2140/2160 1.0.0.17         
 
#--------------------------------------------------------------
 
 
 
 
####################################################################
 
## Change Log End                                                 ##
 
####################################################################
 
 
 
 
 
 
 
####################################################################
 
# Account Settings                                                ##
 
####################################################################
 
####################################################################
 
# Account 1                                                       ##
 
####################################################################
 
#-----------------------------------------
 
# Account 1/General Settings
 
#-----------------------------------------
 
# Account Active. 0 - No, 1 - Yes. Default is 1
 
# Number: 0, 1
 
# Mandatory
 
P271 = 1
 
 
 
 
# Account Name
 
# String
 
P270 =
 
 
 
 
# SIP Server
 
# String
 
P47 =
 
 
 
 
# Secondary SIP Server
 
# String
 
P2312 =
 
 
 
 
# Outbound Proxy
 
# String
 
P48 =
 
 
 
 
# BLF Server
 
# String
 
P2375 =
 
 
 
 
# SIP User ID
 
# String
 
P35 =
 
 
 
 
# Authenticate ID
 
# String
 
P36 =
 
 
 
 
# Authenticate Password
 
# String
 
P34 =
 
 
  • 0 gebruikers vonden dit artikel nuttig
Was dit antwoord nuttig?

Gerelateerde artikelen

Grandstream ATA (HT8XX)

Grandstream ATA (HT8XX) Getting Fax machines to function correctly on a Grandstream...